Free network monitor – monitoring software #easynetmonitor, #freeware #net #monitoring, #free #network


#

Free network monitor – monitoring software EasyNetMonitor

  1. Is it possible to start the network monitor from FLASH drive?

Yes. Copy the EasyNetMonitor.exe file to the FLASH drive and start it. No installation needed.

By default EasyNetMonitor.exe uses the config file (enm_config.txt) from the folder C:\Users\USER\Documents\EasyNetMonitor .
But if in the EasyNetMonitor.exe folder there is the config file (enm_config.txt) then this file will be used in any case.

If you define the ‘Log’ as the event log folder in the Options window (in the enm_config.txt) then will be used the folder ‘Log’ in the EasyNetMonitor.exe folder as the event log folder.

You can use ‘..\Log’ notation for event log folder if needed.

Run program, open popup menu and add address of needed remote PC or internet host.
The new icon with this address will be added in EasyNetMonitor popup menu.
This icon will be green if the PC with this address is reachable across a network, otherwise the icon will be red.

EasyNetMonitor works by sending “echo request” packets to the target PC and listening for “echo response” replies. Program uses ping (ICMP) tool built-in Windows system.

If needed add EasyNetMonitor in the list of trusted (excluded) programs in Windows Firewall and Antivirus on your PC.

Please set the 25 Port without SSL to use your corporate email server.
If you want to send email notifications using gmail.com see here. if you use yahoo.com – see here .

If you use the smtp.gmail.com and receive the error messaage The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required then enable Less Secure Sign-In in your google account. After sign into google account, go to: https://www.google.com/settings/security/lesssecureapps

Emails fails, what can be the problem?
Please see the log file – there are error messages in it if email fails.
Please check:
Firewall settings – may be FW blocks ENM.
Antivirus settings – may be antivirus blocks ENM.
Please note – the name of PC should be in english!

  • Is there any possibility to add multiple email addresses for alerting in the case of failures?

    Yes, you can use several email addresses (use CC box in email options).

  • How many maximum IP’s that we can monitor from this software?

    In EasyNetMonitor you can use only 20 hosts.
    EasyNetMonitor RPO and SE do not have hosts limit.

  • The config file (enm_config.txt) is compatible for all versions of EasyNetMonitor, PRO and SE?
  • Can I edit the config file manually?

    Yes, of course. The program (service) should be stopped in this time.

  • Is there a way to mass add address? I can see what need to be set it in the config file, can I set my own. Something like [1][2] etc?

    Yes, of course, but this ID’s should be unique.

    [ID_IS_ANY_UNIQUE_STRING]
    TABLE=T_MAIN
    ADDRESS=google.com
    NAME=google website

    Each host should always have these four lines in the configuration file, others lines in section of the host are not mandatory.

  • Do I have to deinstall the program, if I use portable version?

    No, simply remove the program file of network monitor.

  • What to do if you see “Error at initialization of the address (0*с0000135). For Close press ОК. “?

    Such message appears when th Microsoft .NET 4.0 package isn’t installed on PC.

    FAQ for EasyNetMonitor PRO and EasyNetMonitor SE.

    1. Is it possible to start EasyNetMonitor PRO from FLASH drive?

    Yes. Copy the EasyNetMonitorPro.exe file to the FLASH drive and start it. No installation needed.

    By default EasyNetMonitorPro.exe uses the config file (enm_config.txt) from the folder C:\Users\USER\Documents\EasyNetMonitor .
    But if in the EasyNetMonitorPro.exe folder there is the config file (enm_config.txt) then this file will be used in any case.

    If you define the ‘Log’ as the event log folder in the Options window (in the enm_config.txt) then will be used the folder ‘Log’ in the EasyNetMonitorPro.exe folder as the event log folder.

    You can use ‘..\Log’ notation for the event log folder if needed.

  • How change the size of indicator?

    Please use Resize mode (On\Off) item in the popup menu (right mouse click) of indicator. Please see the picture .

    Using group you can:
    1. add top level item in the main menu that contains all hosts from this group
    2. change the order of hosts in the desktop indicator (the sorting rule: string=group+name)

  • What is the name of Windows service of EasyNetMonitor SE?

    The service name is EasyNetMonitorSrv.

  • Which should be settings of host if we would like to send an email after 3 consecutive “lost connection messages”, and then send an email, when the host is available again, but only after its status is “stable” (after 6 “online” messages)?

    You can use the the emulator mode in ENM for testing. Emails will be not send and will appear in “Emulator” window only. Create the simple txt file in ENM folder: enm_emu_offline_list.txt .
    If your host will be in start of some line of the text in this file – so ENM get “lost connection” message after ping for this host.
    For testing is useful to disable ENM monitor on some time and send pings from “Ping now” window for this host only.

    The settings in “Options->Email options” window are active for all hosts. If this options are active so will be send log file with info from all hosts. You can not use this options in your case.

  • What is the test (emulator) mode?

    This is a test mode for configuring notifications, e-mail messages and actions. Mode is activated if the text file enm_emu_offline_list.txt exists in the program folder. In this mode, the service (or EasyNetMonitor PRO) stops sending the real ping command to all hosts and gets information about “lost connection” hosts from this file. Addresses of this hosts are listed at the beginning of the lines in this file. All other hosts are “online”.

    In this mode, the actual e-mails will be not sent and actions will be not started. However, the information that the email should send and the action should run appears in the emulator message box. This emulator message box opens automatically.

    The addresses in the file should be at the beginning of the line.
    For example:
    google.com
    cnn.com
    vk.com

    This means that hosts google.com, cnn.com, vk.com are “lost connection”.

    If the address is not in the beginning of the line, that it is “online”.
    For example:
    google.com
    . cnn.com
    //vk.com

    Hosts cnn.com and vk.com are “online”. But there is no connection to google.com.

    You can open the file enm_emu_offline_list.txt in the text editor (Notepad), make changes and click “Save file” without closing the editor. If the program is installed in the Program Files, then run editor (Notepad) with administrator rights please.

    Please rename or delete this file to stop test (emulator) mode.
    It is not necessary to restart the service EasyNetMonitorSrv in EasyNetMonitor SE.


  • Asset – Wealth Management country reports #web #based #asset #management, #switzerland; #germany;


    #

    Asset Wealth Management country reports

    PwC and accelerando have joined forces to deliver asset wealth management country reports on European markets.

    The powerful combination of PwC’s expertise in the asset management industry and accelerando’s knowledge of Europe’s fund selector and investor landscape offers investors an exciting new tool.

    Our country reports are a must have for asset wealth managers considering the opportunities in a particular country or trying to understand the latest asset management trends, investor appetite for various asset classes, ease of market entry, level of competition and distribution channels.

    Our reports draw upon the knowledge of a large pool of country and industry experts to help clients perform better in existing markets and identify new markets in a rapidly changing environment. Through our structured research, based on quantitative and qualitative analysis, we help you to understand how multiple factors in the world of asset management affect your business.

    Each country report provides you with insight on:

    • The state of the asset management industry
    • The key trends shaping the future of the industry
    • Products that are in demand
    • Your competitors
    • Institutional investors and their asset allocations
    • Wholesale fund selectors and the asset classes that interest them
    • The strongest distribution channels and how they are evolving
    • Prevailing market strategies

    Our in-depth reports contain more than 50 pages of analysis, including data on AuM, asset class breakdown, net sales, investor asset allocations, distribution channels and much more.

    About us

    About accelerando associates

    Founded in 2004, accelerando is a leading European asset management consultancy with offices in Frankfurt, London and Valencia. accelerando provides fund research and bespoke strategic advice to specialist and mainstream asset management companies around the globe. Its international team combines cutting-edge experiences from investment sales, investment management and consulting from four different European countries, in five European languages.

    Based on its vast experience and insight, accelerando has built an unparalleled platform on European fund intelligence. The company helps asset management firms to develop and to optimise in a smart, practice-focused and cost-efficient manner.

    About PwC Market Research Centre

    The PwC Market Research Centre is a multi-purpose department composed of analysts, experts and economists who assist clients in their decision making by providing industry-focused thought leadership pieces, macroeconomic forecasts and survey analyses with a focus on the financial services industry. The Centre’s team includes experts from diverse backgrounds. Its clients feature companies in the financial sector, trade and industry, international institutions and government bodies.


    Ad net, ad net.#Ad #net


    #

    ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net

    Ad net�u�t���[�y�[�p�[�@�Ȃ���v�ڍׂ͂�����

    Ad net

    Ad net

    Ad net

    Ad net


    HughesNet Satellite Internet Plans & Reviews #hughes #net #business


    HughesNet Internet Plans & Reviews

    Full Advertiser Disclosure:

    In order for MoneySavingPro to remain a consumer free service, many of the companies covered in our industry reviews compensate MoneySavingPro for new sign ups.

    However, the results of our comparison tools, the rankings of the providers, and the information presented is not affected by compensation. Indeed, many of these companies approach us for an advertising partnership after we have already written and published their reviews.

    While we try to research and review as many providers as possible in the industries we cover, we have not reviewed every company available.

    Our ranking system is independent of compensation and reflects our understanding of the industry and the company based on a variety of factors. The companies that receive the highest rating will always be the providers that we believe offer the best value to the consumer.

    HughesNet Reviews

    by Ethan Popowitz Last Updated: May 15th, 2017

    HughesNet, which was established as a satellite internet service provider since the mid-1990s, has become a big name in the world of satellite internet, building on its strong and lengthy reputation.

    Of course, the rural area provider has competitors like Dish Net to worry about, and that’s why it’s vying for your attention, with deals and other perks. Of course, the trouble with competition for consumers is selecting the satellite dish provider that’s right for you.

    Inside this guide, you’ll find the important details regarding the HughesNet internet plans, including the internet connection speeds, the Hughesnet customer service, the tools and apps, and more. Hopefully, by the time you finish this guide, you’ll know whether or not HughesNet satellite internet is right for you.

    Internet Plans

    There are plenty of HughesNet internet plans for you to choose from, especially since the satellite dish provider has unveiled the Gen5 technology. And you know what Gen5 means? That’s right, faster high-speed internet.

    However, this means that the previously available HughesNet satellite internet plans have been changed. Now all of the purchase options include 25 Mbps download speeds and 3 Mbps upload speeds. So how do the purchase options differ then? Well, you’re instead paying for the data cap, which ranges between 10 and 50 GB.

    What’s also included in these high-speed internet plans?

    Built-in WiFi, meaning that you can connect your home wirelessly, no hard data limits, meaning that once you exceed your data cap, you won’t be cut off or charged more but instead face reduced speeds, video data saver, meaning that you can watch more videos while using less data, bonus zone (50 GB of free data between 2 AM and 8 AM, when internet congestion is less likely to occur), and free standard installation, though this can be a limited time offer.

    Overall, these internet access plans are fantastic if you happen to live in a rural area where only dial-up internet (and dial-up internet is just not feasible in today’s society) is available and have a clear view of the southern sky. Let’s delve into each quickly.

    • HughesNet 10 GB. This service plan is perfect for a single person or two who indulges on the internet.
    • HughesNet 20 GB: This is best for a small family or a group of friends.
    • HughesNet 30 GB: This service plan is ideal for the modern family, who enjoys streaming constantly and downloading large files.
    • HughesNet 50 GB: This data cap is great for those who enjoy using the internet constantly (though it still feels a little limited compared the 1 TB caps Comcast XFINITY internet incites).

    Key Considerations of HughesNet Internet

    HughesNet’s services have therefore evolved over the years and the provider now offers pretty impressive satellite internet speeds via its Gen5 service. The provider, while not among the best internet providers available. also offers various contact methods for customer service, with around the clock tech support, online assistance, and even live chat support.

    HughesNet’s services have therefore evolved over the years and the provider now offers pretty impressive satellite internet speeds via its Gen5 service. The provider also offers various contact methods for customer service, with around the clock tech support, online assistance, and even live chat support.

    Among all the providers of satellite internet service, what HughesNet stands out with is their commitment to offering competitive prices, fast speeds with their Gen5 service, and mass availability regardless of how remote your location may be.

    Gen5 technology is especially appealing because it provides some of the fastest download speeds around when it comes to satellite internet, so shopping, chatting, watching video clips, and downloading music can be done without frustration and total convenience. However, if you do purchase any of these plans, you must commit to a 24-month contract, or you’ll face an early termination fee. And for the first 90 days, the early termination fee will be high – $400 to be exact.

    As one of the most experienced and trusted names in the industry, HughesNet provides internet services are operated through more than 2.5 million systems, in over 100 different countries.

    Pricing and Packages

    A variety of plans is available with HughesNet for their satellite internet services. It is available nationwide, in all 50 states. Prices range between $49.99 and $129.99 per month (though you could be eligible for temporary monthly savings), plus additional fees such as $9.99 for the lease option of equipment.

    Installation and one-time setup do not have extra charges. The fee for early termination can be anywhere between $200- $800.

    Deals

    Unfortunately, unlike many other service providers, HughesNet may not offer discounts when it comes to bundles. However, it may happen as part of a limited promotion; for instance, if you add HughesNet Voice, you’ll receive $75 instant savings on lease options, $10 monthly savings for three months, and free installation and activation when ordered with a new HughesNet system.

    However, they are known to run a variety of specials and offer savings options such as free standard installation.

    Data Limits

    The amount of data allowance you get will depend on the package you opt for. With the entry package, the allowance is 10GB but you also get another 50GB of bonus data to use between 2 AM and 8 AM, when there is no internet congestion. There is also an option to purchase more data in blocks should you need to.

    Speeds

    HughesNet offers a choice of satellite internet packages, with all packages offering download speeds of up to 25 Mbps. As is the case with most satellite services, you may experience latency that can impact the ability to engage in activities such as heavy gaming.

    However, for day to day use and browsing, the speeds offered are perfectly sufficient. The amount of data allowance you get will depend on the package you opt for.

    HughesNet Customer Support

    HughesNet offers their customers several options for communication: phone, email, and online chat. Support via phone is accessible 24 hours daily, 7 days per week. The chat will connect you to a representative instantly to resolve issues. Email support should be used for less dire circumstances, as one can expect a response within 24 hours.

    HughesNet customer reviews and company reputation are two great ways to determine whether or not you might enjoy a HughesNet internet package. On the Better Business Bureau, HughesNet is an Accredited Business with an A+ score .

    Trustpilot, a website that ranks companies purely from customer reviews, rates HughesNet a 0.5/10. Keep in mind that the experiences of one customer are not representative of the company as a whole, but it is important to spot potential issues you may have with the company early nonetheless.

    Tools and Apps

    • If you are located in a rural or suburban locale, HughesNet is a legitimate option for those in search of a reliable and fast satellite internet provider and only have the option of dial-up internet access. If you have an unobstructed view of the southern sky, their service should work for your any of your typical needs.
    • HughesNet Gen5 offers a leading innovation in satellite internet with their 5th generation high-speed technology, and it is a serious high-speed option for those looking for the best performance with satellite.
    • HughesNet’s website is extremely in-depth and offers a generous amount of information geared towards informing and educating the consumer.

    Recap

    To sum up, HughesNet does offer very decent speeds even with its base package, which is ideal for those who just want to browse and perform day to day online activities. However, with no bundles available it may not be the most convenient option for consumers, although it could prove ideal for those who want standalone satellite internet.

    HughesNet is a great option for those in the market for satellite internet providers. While they have not received the highest rating for their customer service, in so many ways they offer a great product, at an exceptional price.

    Their Gen5 service is an exciting option for speedy internet, and it’s a highly innovative choice as an option for those in rural, remote or off-the-grid areas.

    HughesNet Internet Plans FAQs

    Q How fast is Hughes Net Internet?


    Net developer #net #developer


    #

    features

    sky

    • default catalogue of over 600,000 stars
    • extra catalogues with more than 177 million stars
    • default catalogue of over 80,000 deep-sky objects
    • extra catalogue with more than 1 million deep-sky objects
    • asterisms and illustrations of the constellations
    • constellations for 20+ different cultures
    • images of nebulae (full Messier catalogue)
    • realistic Milky Way
    • very realistic atmosphere, sunrise and sunset
    • the planets and their satellites

    interface

    • a powerful zoom
    • time control
    • multilingual interface
    • fisheye projection for planetarium domes
    • spheric mirror projection for your own low-cost dome
    • all new graphical interface and extensive keyboard control
    • telescope control

    visualisation

    • equatorial and azimuthal grids
    • star twinkling
    • shooting stars
    • tails of comets
    • iridium flares simulation
    • eclipse simulation
    • supernovae and novae simulation
    • 3D sceneries
    • skinnable landscapes, now with spheric panorama projection

    customizability

    • plugin system adding artifical satellites, ocular simulation, telescope configuration and more
    • ability to add new solar system objects from online resources.
    • add your own deep sky objects, landscapes, constellation images, scripts.

    news

    system requirements

    minimal

    • Linux/Unix; Windows 7 and above; OS X 10.8.5 and above
    • 3D graphics card which supports OpenGL 3.0 and GLSL 1.3
    • 512 MiB RAM
    • 250 MiB on disk

    recommended

    • Linux/Unix; Windows 7 and above; OS X 10.8.5 and above
    • 3D graphics card which supports OpenGL 3.3 and above
    • 1 GiB RAM or more
    • 1.5 GiB on disk

    developers

    social media

    collaborate

    You can learn more about Stellarium, get support and help the project from these links:

    bzr

    The latest development snapshot of Stellarium is kept in Bazaar, a distributed revision control system. If you want to compile development versions of Stellarium, this is the place to get the source code.

    git

    The official Git-mirrors of latest source code of Stellarium.

    irc

    Real time chat about Stellarium can be had in the #stellarium IRC channel on the freenode IRC network. Use your favorite IRC client to connect to chat.freenode.net or try the web-based interface .

    supporters and friends

    Stellarium is produced by the efforts of the developer team, with the help and support of the following people and organisations .


    How to Find Affordable Health Care #health #care, #healthcare, #medical #care, #coverage,


    #

    How to Find Affordable Health Care

    Many kids in the United States aren’t covered by health insurance, or are covered by plans with high deductibles and limited benefits.

    If your kids are among them because you can’t afford adequate coverage or your employer-sponsored plan doesn’t cover everything, don’t despair. Programs are available that provide affordable even free medical care and are designed to meet or supplement a person’s medical insurance needs.

    Your kids could be eligible for coverage right now and you might not know it. Here are some options that may be available to your family.

    Enroll Your Child in a Public Program

    Two public programs work together in every state to provide health coverage for children in low- and middle-income families: Medicaid and Children’s Health Insurance Program (CHIP).

    Medicaid is run by states with a mix of state and federal funding. It offers health coverage for those with limited incomes, including children and parents, pregnant women, those with disabilities, and seniors. And kids might be eligible for coverage if they’re U.S. citizens or lawfully admitted immigrants, even if their parents are not.

    CHIP is a program funded by the federal government that each state administers. It provides health coverage for American kids under age 19 in working families who qualify based on their parents’ income. CHIP is often helpful for families with incomes too high for Medicaid, but who are still having a hard time affording health insurance.

    Each state has different CHIP rules. Some CHIP programs, for example, cover pregnant women as well as parents and related caregivers (such as grandparents raising their grandchildren). Each state has its own name for its CHIP and children’s Medicaid programs, too (for instance, the CHIP program in Delaware is called Delaware Healthy Children Program; in Connecticut, it’s called the Husky Plan).

    To learn about your state’s CHIP and Medicaid programs and other services available to your family, visit InsureKidsNow.gov or HealthCare.gov. There, you can apply for CHIP or Medicaid online. You also can call 1-877-KIDS NOW (1-877-543-7669) to find out about the CHIP program in your state.

    A child’s eligibility for these government programs is based on household income. Once your child is enrolled, you’ll receive a list of medical providers near you who accept CHIP/Medicaid patients. You can then make appointments with those providers any time your child needs to see a doctor and also be covered in case of an emergency.

    Find a Private Insurer

    The majority of kids from low- or middle-income families will qualify for free or low-cost health care through Medicaid and/or CHIP. But now, through the Patient Protection and Affordable Care Act, many privately run health insurance companies will offer similar benefits.

    You can find out if your family is eligible for a plan by visiting the virtual health insurance marketplace at HealthCare.gov. This government service and its website make it easy to apply for insurance and learn which programs are available in your area. By just filling out one application form, the marketplace allows you to compare and contrast the benefits of each plan, as well as compare out-of-pocket expenses like co-pays and deductibles for care.

    Visit a Local Community Health Center

    A federally funded community health center is another option for low-cost medical care for your kids. You can take your kids there for checkups, immunizations, treatment when they’re sick, dental care, prescription drugs, and mental health care.

    You also can go there for complete care yourself, including when you’re pregnant and for substance abuse care if you need it.

    These centers tend to offer medical care on a sliding scale based on your income. Depending on your situation, it could be free. These centers can help you get health insurance and usually will accept that insurance once you are enrolled.

    To find one near you, visit the Department of Health Human Services (DHHS) health center page and enter your zip code under “Find a Health Center.” Check the website of the center near you about services, costs, and hours and call ahead for an appointment. Some community clinics are only open on certain days or for limited times.

    Rural health centers, which are similar to federally funded community health centers, serve families in rural areas. You can find one in your state by visiting the Centers for Medicare and Medicaid Services website .

    Also, visit the National Association of Free and Charitable Clinics’ website to find a free or low-cost clinic. The U.S. has more than 1,200 free clinics, which are staffed by a volunteer workforce of doctors, dentists, nurses, therapists, pharmacists, nurse practitioners, technicians, and other health care professionals.

    You also might know about urgent-care centers, which are different from community health centers, rural health centers, and free clinics. These centers are designed for people who need care right away or when their doctors aren’t in the office. They can be expensive and might not take some types of insurance. Be sure to check with your insurance company before going to one of these.

    Talk Dollars With Your Doctors

    If your kids don’t qualify for a public program (such as Medicaid or CHIP), they need services that aren’t covered by your insurance, or you have a high deductible, you can try negotiating a reduced, cash-paying rate with your pediatrician before getting services. Cutting deals with doctors is done more often than you might think.

    Start by asking: “Do you accept patients on a fee-for-service basis?” If your insurance has a high deductible, consider yourself a self-paying patient until that deductible is met. So, your discussion about money with your doctor might begin like this: “I’m going to have to pay 20% of the cost of that procedure and I can’t afford it” or “that’s not covered by my insurance.” Talking dollars can be helpful because the doctor might be able to suggest less expensive treatments.

    And don’t be afraid to shop around for a doctor who can provide care at the lowest price. If specialist A agrees to do a certain type of surgery for $2,000, for example, and surgeon B can do it for $1,500, you’ll save $500 by going to doctor B. But be sure that you’re never compromising the quality of your child’s health care for cost. When comparing rates, look for providers who’ve been referred by your doctor or another source you trust.

    For suggested self-pay rates on a variety of medical services, visit Health Care Bluebook’s website .

    Because each provider typically receives payment separately, be prepared to negotiate with each provider your child sees. If the procedure you’re discussing for your child requires general anesthesia, for example, be sure to ask the surgeon which anesthesiologist she works with and contact that doctor, too, to negotiate a cash-paying price for his services. And don’t forget to ask if there’s a facility fee for where the surgery takes place and negotiate that, too.

    Find a Safety-Net Hospital

    In 1946 Congress passed the Hill-Burton Act, which gave hospitals and other health care facilities money for construction and modernization. In return, hospitals agreed to provide a reasonable volume of services to people who can’t pay. The program stopped receiving funds in 1997, but about 170 health care facilities nationwide still must provide free or low-cost medical services. These “safety-net hospitals” are committed to providing access to care for people with limited or no access to health care due to their financial situation, insurance status, or health condition.

    There are safety-net hospitals in every state except Alaska, Indiana, Maryland, Minnesota, Nebraska, Nevada, North Dakota, Rhode Island, South Dakota, Utah, Vermont, Wyoming, and all the territories except Puerto Rico.

    To qualify for free care at a safety-net hospital, you generally have to make a gross yearly income of less than $23,550 for a family of four. If you make more than that, you still may be eligible for reduced-cost care if your income is up to double that amount.

    You can get more information or find a safety-net hospital near you on DHHS’s safety-net hospital page .


    OHosti – Best Free Unlimited Hosting cPanel – Powerful Unlimited Free Reseller


    #

    Free Unlimited Hosting cPanel

    Free Unlimited WHM Reseller Hosting

    Free Domain Name !

    Free VPS Hosting (90 Days)!

    OHosti Powerful Features!

    Free Unlimited Web Hosting Features :

    Flexible, Easy to Use Control Panel . Unlimited Bandwidth. Unlimited Sub Domains, FTP Accounts, and Email Accounts. 99.9% Uptime Guarantee Build your website using the latest languages including PHP, Ruby, PERL, Python, PostgreSQL, MySQL and more. We also provide SSH access on all Business Hosting plans and have enabled WP-CLI for easy WordPress management.

    Why is Our Free VPS Hosting different than Shared and Dedicated?

    With our OHosti VPS, you get an entire server. This is optimal for people that have very high traffic to their websites or need to setup their server in a very specific way. Not everyone needs to have a fully dedicated web server however. If you’re just getting started with your website, you can save quite a bit of money if you get a free small portion of the server. Shared hosting is when you share a portion of the server with other users rather than rent an entire server to yourself. If you are considering a dedicated server and are unsure if it is right for you, perhaps you will need to get Free VPS Hosting.

    What is our free reseller hosting included?

    Everything you need to get started is included in our Reseller packages for a single, no price (free) :

    Free cPanel:
    Unlike other hosting companies, we never charge you or your clients a fee to manage the content and setup of their websites. cPanel makes that easy.

    Free Domains Resales:
    Not only can you sell web hosting, our Reseller Program also gives you the ability to sell domain names.

    IMAP, POP, SMTP Email:
    We offer a variety of email protocols, meaning your clients can check emails anywhere, on any device, easily.

    Free Backups and Installers:
    We include the Softaculous auto-installer totally Free, so you and your clients can set up websites at the click of a button, and we back your sites up every 24-36 hours, automatically.

    Frequently Asked Questions?

    Why is it all free on OHosti? How do you earn?

    We’ve been providing leading free cPanel hosting services with No Ads. All this is made possible by our Paid Dedicated Servers services, including upgrades for those who need more room for growth, as well as donations from our community of users.

    How long will your hosting be free?

    Forever! We have provided Paid Servers services since 2010 and we have been in free hosting business since 2009.

    What are your guarantees?

    1. Our hosting will always be 100% free!

    2. We own all our servers and locate them in high quality data centers, so no one can shut down or reload any server with your data.

    3. We utilise dedicated connections to ensure we can provide enough bandwidth for all our users.

    Free Domain Name Privacy

    Did you know that whenever a domain name is registered, The Internet Corporation for Assigned Names and Numbers (ICANN) requires your personal information be published in the WHOIS database? This includes your mailing address, phone number and email address!

    With Domain Privacy Protection from OHosti Hosting we will make our information available to the public instead of yours. This can help protect you from potential spammers, telemarketers and even identity thieves. This wouldn’t cost you any thing only $0.00 annually! (Fully Free). Otherwise we would have to use the information we currently have on file for your account.

    Your name will remain as the registrant contact so that you retain complete ownership of the domain.

    You can register a free .com. net. org. tk. ml. ga. cf. gq (including Special Domains).

    Domain Privacy Protection is available with all hosting accounts, including shared hosting, vps hosting, and our dedicated servers.

    Create New Website?

    Build your website in 4 easy steps:

    • 01 Login to Site Builder
    • 02 Select Web Template
    • 03 Publish to your hosting account
    • 04 Select web template search etc.

    Software development magazine: software testing, project management, Agile, Scrum, DevOps, programming, requirements


    #

    Methods Tools is a free software development magazine on Project Management, Software Testing, Agile, Scrum,
    Lean, Kanban, Requirements ( User Stories, UML, Business Analysis), Programming, Databases, User Experience (UX)
    Open Source Tools, Software Process Improvement, Software Architecture, Peopleware, Mobile Apps
    Subscribe to Methods Tools if you are not afraid to read more than one page to get smarter!

    Last Articles Published by Methods Tools

    Lean UX and the Language of Change
    Learn how the language used in a Lean UX approach can help uniting the team and solving customers problems.

    Project Deadlines are Elastic by Value
    There is nothing wrong with deadlines but deadlines should come from business need, not effort estimates which are magically transformed into deadlines.

    Improve Software Testing with Containers
    This article presents how container technology improves different software testing tasks and its benefits.

    Automated Testing Strategy for a Microservices Architecture
    This article explains how adopting microservices opened up new ways to design automated end-to-end system tests.

    Agile Forecasting: Asking Why and Discovering What is Behind the When
    Forecasting is guesswork, it may be scientific guesswork and it may be based on past experience, metrics, and clever projection tools, but it is a guess. You will be wrong far more often than you are right.

    InversifyJS – IoC container for JavaScript, TypeScript Node.js
    InversifyJS is an inversion of control library that works with frontend and backend JavaScript applications like Node.js.

    Codetrack – Free .NET Performance Profiler and Execution Analyzer
    Codetrack is a free performance profiler and execution analyzer for .NET applications.

    Ada: a C Developer’s Perspective
    Learn how the Ada programming language helps solving modern software development challenges like coding for IoT.

    Explore the best in Agile practices Agile2017, August 7-11 2017, Orlando, USA
    Recommended project management software for Agile teams and enterprises
    TimeShiftX – Test automation software for date shift testing time travel of applications.
    TestMatick – independent software testing and quality assurance company
    Discover the best available Open Source Project Management Tools


    OHosti – Best Free Unlimited Hosting cPanel – Powerful Unlimited Free Reseller


    #

    Free Unlimited Hosting cPanel

    Free Unlimited WHM Reseller Hosting

    Free Domain Name !

    Free VPS Hosting (90 Days)!

    OHosti Powerful Features!

    Free Unlimited Web Hosting Features :

    Flexible, Easy to Use Control Panel . Unlimited Bandwidth. Unlimited Sub Domains, FTP Accounts, and Email Accounts. 99.9% Uptime Guarantee Build your website using the latest languages including PHP, Ruby, PERL, Python, PostgreSQL, MySQL and more. We also provide SSH access on all Business Hosting plans and have enabled WP-CLI for easy WordPress management.

    Why is Our Free VPS Hosting different than Shared and Dedicated?

    With our OHosti VPS, you get an entire server. This is optimal for people that have very high traffic to their websites or need to setup their server in a very specific way. Not everyone needs to have a fully dedicated web server however. If you’re just getting started with your website, you can save quite a bit of money if you get a free small portion of the server. Shared hosting is when you share a portion of the server with other users rather than rent an entire server to yourself. If you are considering a dedicated server and are unsure if it is right for you, perhaps you will need to get Free VPS Hosting.

    What is our free reseller hosting included?

    Everything you need to get started is included in our Reseller packages for a single, no price (free) :

    Free cPanel:
    Unlike other hosting companies, we never charge you or your clients a fee to manage the content and setup of their websites. cPanel makes that easy.

    Free Domains Resales:
    Not only can you sell web hosting, our Reseller Program also gives you the ability to sell domain names.

    IMAP, POP, SMTP Email:
    We offer a variety of email protocols, meaning your clients can check emails anywhere, on any device, easily.

    Free Backups and Installers:
    We include the Softaculous auto-installer totally Free, so you and your clients can set up websites at the click of a button, and we back your sites up every 24-36 hours, automatically.

    Frequently Asked Questions?

    Why is it all free on OHosti? How do you earn?

    We’ve been providing leading free cPanel hosting services with No Ads. All this is made possible by our Paid Dedicated Servers services, including upgrades for those who need more room for growth, as well as donations from our community of users.

    How long will your hosting be free?

    Forever! We have provided Paid Servers services since 2010 and we have been in free hosting business since 2009.

    What are your guarantees?

    1. Our hosting will always be 100% free!

    2. We own all our servers and locate them in high quality data centers, so no one can shut down or reload any server with your data.

    3. We utilise dedicated connections to ensure we can provide enough bandwidth for all our users.

    Free Domain Name Privacy

    Did you know that whenever a domain name is registered, The Internet Corporation for Assigned Names and Numbers (ICANN) requires your personal information be published in the WHOIS database? This includes your mailing address, phone number and email address!

    With Domain Privacy Protection from OHosti Hosting we will make our information available to the public instead of yours. This can help protect you from potential spammers, telemarketers and even identity thieves. This wouldn’t cost you any thing only $0.00 annually! (Fully Free). Otherwise we would have to use the information we currently have on file for your account.

    Your name will remain as the registrant contact so that you retain complete ownership of the domain.

    You can register a free .com. net. org. tk. ml. ga. cf. gq (including Special Domains).

    Domain Privacy Protection is available with all hosting accounts, including shared hosting, vps hosting, and our dedicated servers.

    Create New Website?

    Build your website in 4 easy steps:

    • 01 Login to Site Builder
    • 02 Select Web Template
    • 03 Publish to your hosting account
    • 04 Select web template search etc.

    WebForms – How do I Unit Test Thee? #asp #net #load #testing


    #

    WebForms How do I Unit Test Thee?

    I m a huge fan of unit testing its my safety net, allowing me to make changes to an application without fear that I ve broken core functionality. With my favorite web development framework, ASP.NET, its been very difficult to build unit tests for the server-side code that you write for the Web Forms UI framework.

    I decided to do some research and start doing something about that.

    This is not a project I was assigned by my employer, nor is it sponsored by my employer. I was writing some ASP.NET Web Forms code and decided to dig further into being able to unit-test my code. The only Microsoft resource used to write this code was a browse through the ASP.NET Web Forms source code, which is freely available to the public at referencesource.microsoft.com

    The biggest things that I want to be able to unit-test in my application are the interactions with the browser: is the Page processing the postback data properly? Is the Page interacting with Querystring data correctly? These are interactions with the HttpContext object which is NOT mockable and very hard to substitute in a Page.

    Some folks have approached this problem by accepting a HttpContextBase object as an optional parameter to a new constructor to a new Page subclass. After tinkering with this approach, I decided that it didn t entirely work for me to add this constructor. it feels unnatural to a web forms developer. Instead, I started a new TestablePage class that inherited from System.Web.UI.Page and would provide a new HttpContext to the Context property. My testable page initially looks like this:

    Not bad. I can take my application and configure those Page items that I want to be able to test and inherit from TestablePage instead of Page and then it becomes easy to mock items from the Context with a test structure like this:

    That s a start we can compose our mock HttpContext of whatever content is needed and jam it into the Context property. What about those other properties that route through the context like Session, Response, and Request? I ve overridden those properties so that they use my derived property. Check out how I simplified the Request property:

    I use a similar trick with Response and Session properties on the TestablePage class. Now we have a reliable base-class that can be substituted for the Page object in a WebForms application and mock out these simple objects.

    Not so fast we have Page Events!

    Of course the heart and soul of writing code-behind code for a WebForms application is the ability to handle and inject business logic in the four basic Page events: Init, Load, PreRender, Unload. If we re really going to start testing a Web Forms application, we need to be able to emulate these page events and trigger them when we need them.

    To make this possible, I added a method to the TestablePage class called FireEvent that would allow you to trigger one of these events with your own collection of event arguments:

    Simple right? Now you can verify that when the Load event is triggered that an appropriate action is taken.

    Just the beginning

    I know that I m missing a lot of capabilities to be able to emulate: AutoEventWireup of events, IsPostback property and complete creation of the control hierarchy to name a few. I think this is something that can prove to be very useful for teams that are refactoring their applications so that they have reusable components that are more easily migrated to ASP.NET MVC, WebAPI, or even to ASP.NET 5.

    The source code for this Web Forms Test Harness is available on my GitHub repository at: http://github.com/csharpfritz/WebFormsTest

    and the harness can be added to your unit test project (supporting .NET 4+) from NuGet with the following command:

    I have marked the package and source code with the Apache license so that you can use it without limitation in your unit test projects. If you would like to contribute, please send along a pull request or an issue report. I have some more advanced features planned and I want to spend some time with my quality assurance friends to see what features can be added to this harness that may help make their lives easier too.

    Share this:


    Приложения в Google Play – myAT – T Business #www #attbusiness #net


    #

    Перевести описание на Русский с помощью Google Переводчика? Перевести на Английский

    Описание

    myAT T Business allows End Users and Account Managers on Corporate accounts to manage their AT T Wireless Accounts from their Android devices.
    With this application, you ll be able to easily and securely manage specific account functions including:

    -Bill Payment from a new or existing payment method
    -Schedule Future Dated Payments
    -Setup or manage AutoPay
    -Reset Voicemail Password
    -Find AT T Wi-Fi Hotspots and Store Locations
    -Create or reset Custom End User PIN
    -View Usage including Mobile Share Usage
    -Contact Customer Care or Tech Support via Call or Chat with just the tap of a button
    Additionally, as an Account Manager, you will be able to also
    -View the full bill (up to 12 months of bill history available)
    -Change Rate Plans
    -Add International Features
    -Suspend Data for an end user
    -Update SIM/IME
    -View Usage for the entire account

    You must have an active AT T CRU account in order to use this application. Some functionality may not be available based on your company agreement with AT T. myAT T Business does not support non CRU accounts.

    Мьят T Business позволяет конечным пользователям и Менеджеры счетов по корпоративным счетам управлять их AT T Wireless Учетные записи со своих Android устройств.
    С помощью этого приложения вы сможете легко и безопасно управлять специфическими функциями счетов, включая:

    -Билль Оплата из нового или существующего способа оплаты
    -Schedule Будущее датированных платежей
    -SETUP Или управлять Автооплату
    -reset Голосовая почта Пароль
    -Найти AT T Wi-Fi доступом в Интернет и магазин Местоположение
    -Создайте Или сброс пользовательских конечного пользователя PIN
    -View Использование включая Mobile Share Использование
    -Контактная Обслуживания клиентов или техническая поддержка по телефону или в чате только с нажатием кнопки
    Кроме того, в качестве менеджера аккаунта, вы сможете также
    -View Полный счет (до 12 месяцев истории счета доступны)
    -Изменение Тарифных планов
    -Add Международные Особенности
    -Suspend Данных для конечного пользователя
    -Обновление SIM / IME
    -View Использование для всей учетной записи

    Вы должны иметь активный CRU счет AT T для того, чтобы использовать это приложение. Некоторые функции могут быть недоступны на основе вашей компании соглашения с AT T. Мьят T Business не поддерживает учетные записи не являющиеся CRU.

    Отзывы

    Что нового

    Дополнительная информация


    Logic Vein – Net LineDancer – Network Management Configuration Software #net #linedancer,


    #

    Net LineDancer

    What Is Net LineDancer?

    Net LineDancer is designed to help network engineers manage the configurations on the network devices (routers, switches, etc.) in their enterprises. Net LineDancer provides inventory reports, detailed hardware and software information of their devices, configuration comparison and history, password change, automated detection of configuration changes, and integration with network monitoring systems. Net LineDancer also provides a simple but powerful web based user interface where you can perform all of these tasks with ease.

    Multi-Tenancy

    This is great solution for managing your network from a single location even if your network has multiple subnets with overlapping IP spaces. Designed to scale for MSPs but equally useful in your enterprise. A SmartBridge is deployed in each managed network, even geographically distant ones, and integrated into a single core.

    Terminal Proxy Auto-Login

    Provides an integrated Terminal Proxy that allows users already authenticated into Net LineDancer to SSH/Telnet into network devices with automatic login. No more remembering tens or hundreds of credentials. Terminal Proxy captures all terminal activity and then logs, timestamps, and indexes it for later search and retrieval.

    Inventory Management

    Full hardware inventory for audit including daughter card serial numbers,as well as power-supplies, and even fan tray assemblies. Great for keeping track of your vendor support contracts in sync with your deployed hardware.

    Cisco PnP Support

    Cisco PnP devices, in combination with a Cisco PnP-compliant server, can provide “hands free” configuration of new equipment in your network. Cisco PnP + Net LineDancer enables zero-touch deployments in a wide variety of network topologies, over both internal and Internet infrastructure, and even via an iPhone application over 3G/4G infrastructure.

    Unique Changes

    Not all network changes are straight-forward. Sometimes you need to push out the “same” change to many devices, but there are some parameters such as IP addresses that are different. Our Bulk Change tool allows you to create templates for these and even import/export target devices and parameters from Excel.

    Draft Configuration

    Net LineDancer compares drafts with the existing configuration, and automatically recommends the set of commands to apply the proposed draft configuration to the device. This avoids unexpected interface shutdowns or the need to restart devices.

    Active Redundancy

    Net LineDancer (Linux Edition) introduces disaster-proof 24/7 operation with Active/Active Redundancy support. Whether in the same rack or another Data Center, Net LineDancer provides redundancy in both LAN and WAN deployments.

    API for NMS

    Net LineDancer public APIs ease integration into your existing systems. Integration APIs use standard JSON-RPC over HTTP allowing simple integration by any programmer.

    Your Success Is Our Success.

    Our business will only flourish via your success.

    Our Business consists of partner sales and direct sales and partner sales exceeds more than 80% of our total sales. With no partners and resellers, we would not be able to make it in the marketplace.

    Benefits & Features

    -“Configurations-errors-costs” to “Configurations-no errors-no costs with netLD”
    -Accomplish more effective way of managing network configurations.
    -Engineers are happy ,bosses are happy and companies are happy!


    How to Buy McDonald – s Stock – Blog – Saving Advice


    #

    How to Buy McDonald s Stock

    McDonald s is one of the largest companies in the world. The company has locations in just about every country and makes billions of dollars each year. McDonald s does a great job of keeping its customers and stockholders engaged as well. There are constantly new promotions and ideas being launched within the company and, if there s a lag, the McRib can always come back.

    Because MD s is such a popular and successful restaurant many people want to know how to buy McDonald s stock. If you ve never bought stock before, below is a step by step guide on how to buy McDonald s stock.

    How to Buy McDonald s Stock

    There are many ways you can buy McDonalds stock. You can contact your local brokerage or buy it through one of the many online brokerage websites. You can also go through the McDonald s site itself. If you re looking to buy McDonald s stock you may want to check out an online brokerage company.

    Picking the right brokerage company for your needs can be difficult. If you are a more active trader you may want to search for a broker with lower fees, or maybe you are a trader that likes to hold on to their stock and need a company with no transaction fees at all.

    Most online brokerage companies charge a fee of $5 to $10 for handling your investments. You can even begin trading with some more traditional companies like Scottrade, Fidelity and Charles Scwab. The online broker I d recommend for buying McDonald s stock, however, is Ally.

    Ally is a great place to start trading, especially if you re looking at a specific stock. The company prides itself on providing traders with all the tools they need to become a do-it-yourself trader. Another great thing about Ally is that there is no account opening minimum and they keep all of their fees extremely low. You pay a flat $4.95 for Stock and ETF Trades, $0.65 + $4.95 base for Options trading and $1 on bonds (minimum of $10 for bonds trading).

    If you re interested in how to buy McDonald s stock through Ally you ll want to set up an account for yourself. Ally provides research materials and various other tools for all of its traders so if you re feeling overwhelmed, don t worry. They ve got you covered.

    Once you ve set up your account you can begin searching for McDonald s stock and any other stock you may be interested in. You ll want to set up either a one-time purchase of stock or a recurring monthly amount. Currently to stock price of McDonald s is over $150.

    After You Invest

    Once you ve figured out how to buy McDonald s stock you can begin investing elsewhere too. Ally offers its investors great trading options with a plethora of successful companies (and it takes way less time than a traditional broker). Making your first investment is exciting. Remember, even if it is only a little bit every month it is better than nothing at all. Open an Ally Invest account today. your wallet will thank you!

    Have you invested in McDonald s stock? How did you do it?

    People who liked this article also enjoyed:

    Like Saving Advice? Subscribe!

    Subscribe to get the latest Saving Advice content via email.

    Comments

    Pingbacks

    Leave a Reply


    Metal Recycling, Scrap Metal Recyclers in Saint Louis, Missouri (MO), Dickson, Tennessee


    #

    Partnering with Integrity SM

    Lean Recycling SM

    Highest Scrap Metal Yields

    Partnering with Integrity SM

    Honesty. Transparency. Reliability.

    That s what you can expect when you partner with Shapiro Metals, we are the best industrial scrap recycler in the country.

    Your customized Lean Recycling SM program will allow Shapiro Metals to increase your revenues GUARANTEED. We even provide standardized reports to help you monitor and audit your recycling through our convenient, online Web Portal.

    For more than 100 years, Shapiro Metals has helped manufacturers maximize their scrap metal revenues while reducing their carbon footprint. We design customized Lean Recycling SM solutions that merge seamlessly with your manufacturing operation, without disruption.

    Shapiro Metals, as a global recycler, has strategic resources allowing us to process millions of pounds of scrap metal a year:

    • 150+ million pounds of Non-Ferrous metals
    • 24+ million pounds of Foundry residues

    Shapiro Quality

    Shapiro Metals will meet or exceed our customers’ expectations.

    We are dedicated to continual improvement in all we do, including improving our customers’ sustainability efforts and profitability.